+ Reply to Thread
Results 1 to 8 of 8

Thread: tips for rims repainting

  1. #1
    Junior Member
    Join Date
    Dec 2015
    Location
    Washington
    Posts
    2

    tips for rims repainting

    Hi
    Folks, do you know what paint to take for changing the colour of my wheel rims. I'd like to refresh colour and mask the scratches. I do not have any experience but I hope it will not be very hard to do. Do I need any finish to cover the painted rims?
    Thanks

  2. #2
    Senior Member
    Join Date
    Jan 2014
    Location
    Leander, Texas
    Posts
    188
    They were painted body color from the factory, so gloss enamel would be the correct paint.
    If want them to be factory correct you would need to remove all the paint & paint them black, then you need to paint body color over the black on just the out side of the wheel.
    The Skyliner's & Thunderbirds were done this way and they used the 14" X 5-1/2" wheels with no slots, station wagons & Ranchero's also used the solid center wheel, passenger car wheels have four slots.

  3. #3
    Junior Member
    Join Date
    Dec 2015
    Location
    Washington
    Posts
    2
    Quote Originally Posted by Ford Only View Post
    They were painted body color from the factory, so gloss enamel would be the correct paint.
    If want them to be factory correct you would need to remove all the paint & paint them black, then you need to paint body color over the black on just the out side of the wheel.
    The Skyliner's & Thunderbirds were done this way and they used the 14" X 5-1/2" wheels with no slots, station wagons & Ranchero's also used the solid center wheel, passenger car wheels have four slots.
    thanks, I think that I will partially remove the factory paint with the angle grinder. Can you please say is it good idea or not.. I have the paint for engines https://www.mrosupply.com/paint-pain...de1612_krylon/ Can I apply it?

  4. #4
    Senior Member
    Join Date
    Jan 2014
    Location
    Leander, Texas
    Posts
    188

    Tips for wheel painting

    I hope your angle grinder uses sanding discs, a hard grinding wheel will damage the metal.
    You can probably get them cleaned up enough with angle grinder sanding and hand sanding.
    You could also use paint stripper and then some hand sanding to remove all the paint, media blasting would be best.
    Krylon spray paints would work for the black paint & would also work if they have the correct body color for your car.
    Rattle can painting can give good results but takes many coats as the paint is highly reduced and its easy to get runs if your not careful.

  5. #5
    Senior Member
    Join Date
    Nov 2010
    Posts
    174
    Is it correct to say the tires need to be removed from the rims to paint? Or can you get a nice coat while leaving the tires on and masking everything else?

  6. #6
    Senior Member
    Join Date
    Jan 2014
    Location
    Leander, Texas
    Posts
    188
    You could try to mask but you will not get as good a job with the tires on.
    If you have a bead breaker you can break the bead and put masking paper around the tire and rim and get a better job than trying just to mask the tire.
    It mostly depends on how good of job you want, the best results would be with the tire off the rim.

  7. #7
    Junior Member
    Join Date
    Jan 2015
    Location
    Baltimore, MD
    Posts
    21
    I used a power drill with 2 wire brushes, a thin edge brush and a round orbital brush. They were able to get into just about everywhere since my wheels were dirty and rusted. After that I cleaned them good and painted them with rust encapsulating primer and 2 coats of chassis black. My wheels were entirely black from the factory so I didn't have to paint them a different color on the front. Here's the end result.

  8. #8
    Junior Member
    Join Date
    Feb 2011
    Location
    Fareham, United Kingdom
    Posts
    6
    I had my rims media blasted and powder coated and they still look great 10 years on, even with our damp climate.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts