-
This is one that's on E-bay http://www.ebay.com/itm/1957-1958-19...p2054897.l4275
I don't think you will be able to use the stock wheels without a spacer but if it works let us know as I have a couple more Fords that I may ad disc brakes to in the future.
-
Thanks, Ford Only, I test fit the disc today, it clears OK, using the stock front hub, the studs may be to short, I did not put the wheel on it yet.
I had the hub & the 10" disc on the bench for a test fit, looked good, I will need to make a bracket to hold the caliper, I'll post the results, thanks, Wayne
-
Google Master Power, LLC in Mooresville, NC. Their business is drum/disc brake conversion kits. They can help you. I just upgraded the drum brakes on my '59 to a duel booster system for safety reasons. They supplied everything I needed and it was a straight bolt on conversion.
-
Thanks Ron, I'll do that, did you go with disc brakes-?, Wayne
-
Wayne,
No, I still have drums all around. Original under the hood booster and master cylinder both needed rebuilding, so I opted to change to the dual master cylinder system for a safer braking system.
-
Thanks, Ron, I did find & saved there site, I have a disc brake & caliper that I'm going to put on the front, working on a rear disc also, so far it looks like the stock 14" wheels will work, I'll post the results, thanks, Wayne
-
There is a new rebuild kit for the Kelsey-Hayes underdash unit available from most of the usual vendors now.
The P/B master cyl is 1.125" bore. This set-up stops ok when right.
You can have your shoes relined with softer material for quicker stops.
The bigger bore m/c's move more fluid (for higher line pressure) and are harder to push.
Ron.
-
I want to add something to this discussion for clarity. A smaller master bore creates a higher hydraulic pressure for the same force applied to the brake pedal.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules