These skirts were on my 59 Skyliner when I purchased it. I have never seen fender skirts that attached in this manner and the brackets certainly look like factory welds. Also they are very lightweight.
Any input would be appreciated.
I thought perhaps they were Foxcraft but I have seen Foxcraft skirts that have the same manner to attach as the factory skirts (pins on the ends and the center has a lever to tighten and hold them).
Maybe J.C.Whitney?
Thanks for your thoughts on the matter. They are very difficult to put on or take off. The tires on the car when I bought it were like new but the car had not been driven in over 12 years so I purchased all new tires. When I went to have the new tires installed is when I discovered that the skirts were attached in a very unusual manner. In fact you literally have to lay on your back and slide under the car to loosen or fasten the bolts on the ends.