I just acquired my 59 Skyliner a few weeks ago. The top worked flawlessly before I got it home. When I try to erect the top I have a problem initially that the top goes about 3/4 of the way up and stops. If I reverse it a little and try forward again it usually goes okay; however, after the top tightens down I can hear relays clicking but the trunk flap does not activate. I have accessed the solenoids and can close the trunk flap with a jumper wire on the solenoid and then the trunk lid closes okay. I have removed the front header trim and the relays on both sides are clicking after the top is screwed down okay. Where do I start from here?