My top now goes up and down with one activating switch. It erects all the way but will not retract all the way into the trunk. I had to do some floor repair below the control brackets and I replaced both bracket supports with new ones as one was crudely made. In order to position them correctly I set the control pins into the start of the adjustable control guides and tact welded the brackets to the new floor. The control pins follow the guides 3/4 the way down the guide and stops. Both sides enter and proceed easily. My question is do I have the roof jacks adjusted wrong not letting the top retract further? I'm going to try to attach some pictures and any help will be appreciated. Paul in Ohio]