+ Reply to Thread
Results 1 to 3 of 3

Thread: Reverse on a Cruise O Matic

  1. #1
    Junior Member
    Join Date
    May 2013
    Location
    The Woodlands Tx, just north of Houston
    Posts
    10

    Reverse on a Cruise O Matic

    My car has to warm up for a good 15 minutes before it will engage reverse gear. Once it's running and on the road, reverse works great. But when cold, reverse takes a long time to engage. What gives?

  2. #2
    Senior Member
    Join Date
    Nov 2010
    Posts
    174
    I had this exact problem with my Cruise O Matic. It started with this and eventually got worse after a while. Eventually I had the transmission rebuilt. I knew someone near me who is 80 yrs old who sold his transmission shop and retired but still did old transmissions on the side. A lot of industry knowledge who worked on these when they were new. I watched him take the transmission apart and go through it so I will tell you what he told me. Impressive how quick he got it out of the car and how quick he got it apart - before you know it we were ordering the parts. Half hour at most.

    With mine the seals were shot - They were rock hard and brittle. As you let the engine warm up it caused the seals to soften/expand and actually seal what they were supposed to. Due to this issue the rear band and servo was becoming worn and these issues contributed to a small crack in the case - which is a normal complication with these transmissions. When the seals expand then the transmission is able to pressurize and the pump then works properly etc.

    He mentioned a temporary fix was to put a little DOT 3 brake fluid in with the transmission fluid - he said this was an old trick that helped to lubricate things and soften the gaskets but it is a band-aid.
    Hope this helps - good luck!

  3. #3
    Junior Member
    Join Date
    May 2013
    Location
    The Woodlands Tx, just north of Houston
    Posts
    10
    Thanks, this explains a lot. I've heard of people using Dot3 to lubricate the vacuum windshield wipers too. I know a rebuild is my future, I'm just trying to nurse it along for now.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts