-
Adjust switch so deck lid lifts higher/read my reply to your other post.
-
As mentioned already the switch adjustment should make it work right. Also make sure the motor is mounted properly although that’s probably not it. I am not near my car to give you measurements for height and angle of the deck lid right now.
Also make sure your running the car on flat ground when you do it and that the deck lid jacks are working properly. That’s all secondary stuff to the switch moving to the next step in the process.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules