+ Reply to Thread
Results 1 to 1 of 1

Thread: 59 Upper Control Arm Bushings

  1. #1
    Senior Member
    Join Date
    May 2016
    Posts
    103

    59 Upper Control Arm Bushings

    I wanted to see if you guys only replace the screw-on bushings for upper control arms or if you actually replace the shaft. It appears that the bushings screw onto the shaft and the outer portion of the bushing threads into the control arm. So the part that moves are the threads on the shaft & bushings. Do you all find that the bushings bear the majority of the wear or do the threads on the shaft also take a beating?

    Also, is the centering tool available anywhere to center the upper inner shaft (Tool T58P-3044-A)

    59 A Frame Bushings.png
    Last edited by 1959retractable; 07-21-2017 at 10:17 PM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts