1 Attachment(s)
More information on top problems
I now have the rear window removed by cutting the seal from the exterior.The window slid right out,no problem.The next fix is to reinforce the corners on the package tray.There is no need to remove the rear window to do this but this car is missing the stainless that goes in the seal and has to be removed to replace it.I'm using an article written by Dave Dudt and will need any help from Dave or anyone else that wants to chime in.The tools needed are:(1) A mig welder,(2) A pneumatic cut-off tool,(3) A 3/8" drill and bit,(4) Two flat 1/8"X 3/4"X 6" steel stock.(5) A small bottle jack and several small pieces of wood.