Forum for engine related discussions.
Now that I can finally start putting my engine back together, I need a new camshaft. The old one is not only rust pitted, but in the week it took to...
Would anyone out there in Ford land know where to acquire the proper color paint for the 332 engine? Supposedly it is the single 4 barrel Interceptor...
Hi, I am new to the forum, I recently acquired a running 1958 Skyliner project, it had been sitting for almost 30 years. I have been looking for one...
I seem to be getting excessive oil out of the breather tube. When I removed it and looked at the hole in the back of the intake , it did not seem to...
Gasket/seal in cover at hold down post wingnut. There's a tiny 1/16" factory hole in bottom of said recessed well. Mine has a solid rubber seal that...
I am looking for the correct part number for the vacuum fuel pump on a 1959 - 332. The incorrect was installed many years ago by the previous owner....
What type of coolant should I be using in my Skyliner. Since I live in Hawaii, there is no concern about cold weather.
I have a 57 Skyliner with a 2 barrel carb that looks like a factory carburetor. I recently noticed that the choke isn't hooked up. There isn't a...
Hi all, I have a 1959, 332 with a 2 bbl. I'm still trying to sort out what is right, OK or plain bad with the car! Too many people have had...
Can cylinder head with a casting number of 5752113 be a replacement for a cylinder head casting number ECZ-G on a 1957 312?
I recently removed a 332 from a 59 parts car. Although it is supposed to be low miles, i would rebuild it just to be safe. Does anyone want/need it....
I have a 1959 Ford with a 332 engine that overheats in parades or in slow moving traffic. What can I do to solve this problem?
Does anyone know the size of the freeze plugs in the water jacket of a 332? Thank you, Bill A
I know it was a T-Bird option and a SO option in the passenger car line but has anyone seen or know of a 59 (or even 58) that had an MEL 430 fitted...
Does anyone know where to get a 57 312 engine?
When I park my car after driving coolant runs out of the overflow tube. I drained the system, refilled with Prestone radiator flush, ran it for 60...
My 59 with 352 engine and original exhaust manifolds keeps developing leaks at the exhaust flange. Not at the head mating surface but at the surface...
My 59 With 332 engine was missing the temperature sensor when I got it I have ordered a new part, but I am not sure where to mount it. There is a...
Received the kit from Terry at Jerry's. Really looks nice. Steve (my buddy worker) has the compressor mount and compressor installed. No big issues....
I have A 58 with A 352 and I am looking for the Engine Crankshaft and Water Pump pulleys as well as the mounting bracket and Condenser for the Air...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules